AJA V2Analog Specifications download pdf (Page 44)

Ki Pro features a variety of alarms to help you diagnose the condition of the unit,

possible conﬁguration issues, or possible signal issues. Here is a list of warning

messages and their meaning:

"WARNING Input Format Changed" prompt appears if a recording is started

and the signal is lost or is changed. If this occurs, Ki Pro stops the recording

that is in progress.

"WARNING Record Format" may appear if there is no video input to Ki Pro. No

recording will be performed in this state.

"WARNING A/V Mismatch" may appear if SDI video is selected and HDMI audio

is selected or vice versa. Embedded audio, via SDI or HDMI, must be matched

to the video source. Analog audio can be used with any video input.

"WARNING Dropped Frames" may appear if media is underperforming and

cannot keep up with the data rate required to make a recording or perform a

playback. If you see this prompt during recording, you might consider backing

up your current recordings and formatting the media. For playback, you might

simply re-attempt playback.

"WARNING SDI VFR Mismatch" will appear if you have set the video input to

something other than SDI when parameter 1.1 is set to “VFR”—as only the SDI

input provides the appropriate data for VFR support.

"WARNING Media Low" will appear when the media only has 15% of capacity

remaining. Media must be switched out when it reaches 10% of capacity.

With 10% of media remaining, the "WARNING Media Full" prompt will appear.

"WARNING Media in Use" may appear if you try to remove the media by

pushing the SLOT button while an operation is still taking place. Wait for the

operation to finish and then try again.

"WARNING Media Not Present" may appear if media has been physically

removed and the user hits the slot button.

"WARNING Media Unrecognized" may appear if there is a problem with the

media. To resolve this issue, mount the drive on an Apple computer under

Mac OSX, copy the clips from the media, then re-insert the media into Ki Pro. If

it does not read properly, you will need to format the media.

"WARNING Storage Removed" will appear if the media is removed without first

hitting the SLOT button to properly unmount media. In the event this

happens, media immediately re-inserted into the Ki Pro may show clips as "N/

A" and subsequent recordings may not be possible. To resolve this issue,

mount the drive on an Apple computer under Mac OSX, then re-insert the

media. If it does not read properly, you will need to format the media.

WARNINIG

INVALID SELECTION

WARNING

UNRECOGNIZED MEDIA

WARNING

MEDIA IN USE

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 89 90

No comments

AJA V2Analog Specifications Page 44