AJA V2Analog Specifications download pdf (Page 42)

Playing Back a Clip To playback recorded media, you simply select the clip desired and press PLAY. If the

clip you wish to playback is not currently selected, use the SELECT up/down buttons

until the clip name appears on the display. Like recording, there is more than one way

to initiate playback (front panel, web browser, and wireless). From the front panel

these are the basic steps:

1. Press the STOP button to get to the TRANSPORT mode (if not already there).

Find the clip name in the display (it shows the current clip/reel).

2. Press the SELECT up or down arrow button repeatedly until you ﬁnd the clip

you are looking for.

3. Press the PLAY button ().

4. When playing back a clip (PLAY, FF, or REV) the ﬁrst push of STOP acts as a

“Pause” mode: the playback is paused, the current point of the clip is displayed,

and the STOP button will ﬂash. A second push of STOP will completely stop the

playback and Ki Pro's outputs will go into an “E to E” mode (the currently

selected inputs will be bypassed to the outputs). When a playback reaches the

end of a clip, it will automatically pause on the last frame of the clip.

During playback you can use the FFWD, REV, SELECT, or ADJUST buttons as follows:

FFWD : Press button to begin fast playback of the current clip at 2x speed.

Successive pushes increase the speed to 4x, 8x, and 16x. (Pushing the button

after 16x speed is reached has no further effect.) When fast-forwarding, audio

is muted.

REV : Pressing REV when not lit, begins playback of the current clip in

reverse at 1x speed. Successive pushes increase the speed to 2x, 4x, 8x, and

16x. (Pushing the button after 16x speed is reached has no further effect.)

When playing in reverse, audio is muted for all speeds.

SELECT (up/down): while in TRANSPORT mode, the SELECT buttons select clips

and operate like “previous” and “next” keys. When a clip is selected it is “cued”

to the beginning of the clip. Note that ordering and playback of clips is based

on timestamp order, not clip name. If you have paused playback (the STOP

button is flashing), you can use the SELECT down button to jump back to the

beginning of the clip. If the STOP button is not flashing, depressing the SELECT

down button will select the previous clip.

ADJUST (up/down): while in TRANSPORT mode, and in either a “STOP” or

“pause” state, the ADJUST buttons will “single step” the current clip at a rate of

one frame per button push (up=forward, down=reverse).

Deleting Clips To delete a previously recorded clip:

1. In TRANSPORT mode, use the SELECT up and down arrow buttons to browse

through the clips on the current storage device. (In version 1.0 only the Storage

Module is supported; in a future release Ki Pro will support ExpressCard/34

cards—when a clip is on another storage device, you will press SLOT

repeatedly until it’s selected.)

2. When you ﬁnd a clip you want to delete, press the DELETE CLIP button.

3. Ki Pro will ask “Are you sure”—press the ADJUST up arrow button to conﬁrm

deletion. Pressing the down arrow, or any other button, will abort the deletion.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 89 90

Comments to this Manuals

No comments

AJA V2Analog Specifications Page 42

Comments to this Manuals