AJA V2Analog Specifications download pdf (Page 16)

Operator Side

Ki Pro Operator Side (front panel)

Controls and

Displays

The Operator Side of Ki Pro features a variety of buttons, knobs, jacks, and

indicators for operating Ki Pro directly. Each of the items found on the “Operator

Side” are described here and on the following pages. This side is referred to as the

“Operator Side” because when mounted in the Exo-skeleton, it matches the

operator side of the camera. When controlling camera features, you’ll also be

looking at all the Ki Pro control features for ease of use.

The front panel of Ki Pro operates in two modes: the “TRANSPORT” mode (default),

and the “MENU” mode. Some controls have different functions in these two modes.

The TRANSPORT mode (shown above) controls basic play, record, clip select, etc.

functions. The MENU mode is for set-up and conﬁguration of Ki Pro. There are three

menu groups: STATUS, CONFIG, and MEDIA - these menus are accessed by

depressing the corresponding Menu buttons on the left of the panel.

Buttons

Power

ON/OFF Button—Controls system power on/off and shows whether power

is ON (when illuminated) or OFF. To turn power on, press the button once.It

isn’t necessary to press hard or depress the button—it’s a “soft” button sensed

by the processor inside. When OFF, and the button is touched, it will begin

powering up and display start-up progress on the alphanumeric display.

To power down, you must press and hold the power button down for 2

seconds. This action prevents accidental power-off during normal operation.

When the unit is powering down you can abort the power-down process by

simply removing your finger from the power button before 2 seconds have

elapsed.

STATUS

DELETE

CLIP

SLOT

ADJUSTSELECT

CONFIG

MEDIA

CLIP xxxxxxxx

REEL xxx

01 1 4% S

00:01:21:13

Storage Module (slides into slot)

Slot LED Status Indicators show:

Media Selected—Green

Not-Selected—not illuminated

Recording—flashes Green, On and Off

Expresscard Memory Slots (2) — 34mm 1-lane PCIe

(press card in to mount; press again to eject)

4-pin XLR

Battery Power

Connector

(on side)

Meters

(2 Channel)

Audio

Input

Level

Adjust

(Press in and

knob will pop out

for easy adjustment)

Mic/Line

Phones

L R

Head

Phone

Jack

Head

Phone

Volume

(Press in and

volume adjust

knob will pop out

for easy adjustment)

Storage Module

Release

Button

(press and hold button down

while removing Disk Storage

Cartridge)

140 x 16 pixel

Alphanumeric

and Graphics Display

(typically 2 x 20 characters)

Transport Control Buttons

(Reverse/Stop/Play/Record/Fast Forward)

Power

ON/OFF

(Press to power up,

press and hold for 2 seconds to

power-down; abort power-down

by removing finger before 2 seconds)

Cover Plate

over 802.11 b/g

Antenna

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 89 90

Comments to this Manuals

No comments

AJA V2Analog Specifications Page 16

Comments to this Manuals