AJA V2Analog Specifications download pdf (Page 28)

Exo-skeleton Setup and Adjustment

The Exo-skeleton

option has two

conﬁgurations. As it

comes out of the box,

it contains an

adjustable camera

mount on top, a plate

on the bottom for

tripod mounting, and

two thumbscrews for

securing the Ki Pro

unit to the Exo-

skeleton.

An option that can be

added is an accessory

rod kit that adds

plates to each side of

the Exo-skeleton

frame so that 15mm

user-supplied rods can be used with the camera.

Rods are handy for mounting battery packs, matte boxes, and a wide variety of other

accessories.

For most uses with an Exo-skeleton, you’ll want to ﬁrst mount the camera or

camcorder to the adjustable mount on top, before sliding in the Ki Pro unit and

locking it. To mount a camera, follow these steps:

1. Locate the camera mount locking knob on the Exo-skeleton and loosen it.

2. Slide the camera mount off of the mounting rail.

3. Place the camera on the mount, orienting the mount’s alignment pin to

camera’s corresponding pin socket. Once aligned, tighten the mounting screw

to secure the camera.

4. Slide the camera and mount back on the rail and tighten the locking knob.

Base Ki Pro Exo-skeleton

chassis with camera mount

Knurled thumbscrews

secure Ki Pro chassis

to Exo-skeleton

Kit components:

2 endplates

4 screws (5/32 allen)

4 knobs with plastic washers

Optional Rod Accessory Kit Assembly

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 89 90

No comments

AJA V2Analog Specifications Page 28