AJA KONA LHe Plus Instruction Manual download pdf (Page 50)

SDI Output Screen Settings

Information that can appear includes the following items. You can view the current setting or

use a pulldown menu to select:

Primary—when selected, this indicates that an SDI output (SDI Output 1 or SDI Output 2) is

set to the same format as the framebuffer. That value will be listed in blue.

Secondary—when selected, this indicates that the SDI output is set to a format different from

the framebuffer (Primary Format). That secondary format value will be listed in green.

This shows that active processing of the video is taking place (format change and

possibly down-conversion).

Video+Key—when selected, this selects that both SDI outputs will be used for a Video plus

an associated video Key (hole cut). This will be reflected in the block diagram by showing

the two lines grouped together going from the framebuffer to the SDI 1 and SDI 2

outputs. Selecting Video+Key on one pulldown also causes the other pulldown to

change to Video+Key since the outputs are used as a pair.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 73 74

No comments

AJA KONA LHe Plus Instruction Manual Page 50