AJA KONA LHe Plus Instruction Manual Page 26

  • Download
  • Add to my manuals
  • Print
  • Page
    / 74
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 25
20
Typical System
A figure on the following page shows typical system interconnections for a system with digital
A/V sources. Your system may differ depending on VTRs, audio monitoring, and video
monitoring.
1. If desired, connect your house reference sync to the KONA LHe Ref Loop connector
(BNC). The second KONA LH Ref Loop connector on the KL-box (if used) can be
connected to the VTR or terminated with a 75-ohm terminator.
2. Connect a Video Monitor to the KONA LHe Component Analog Video Out BNC
connectors (preferred), or instead connect to a composite monitor.
3. Connect a 9-pin DB9 machine control cable between your VTRs RS422 control port
and the breakout cables RS-422 machine control connector.
4. Connect two SDI cables between KONA LHe Plus (BNCs are on the card endplate) and
your digital VTR (Digital Betacam etc.): one from KONA LH SDI In to the VTR SDI Out,
and one from KONA LHe Plus SDI Out (1 or 2) to the VTR SDI In. The KONA LHe Plus SDI
connections have embedded audio so the VTR must be configured accordingly.
5. If you have an AES/EBU-ready audio monitoring system, then connect the two
channels of AES/EBU output from KONA LHe’s XLR connectors (channels 1 and 2) to the
monitoring system AES/EBU inputs. If you instead have an analog audio monitoring
system, you can use either the XLR balanced audio connectors or the two RCA-style
unbalanced stereo output jacks on the Optional KL-box for output.
Typical System Connections—Shown with Optional KL-Box
Digital VTR with SDI Inputs
RS422
Machine
Control
SDI Video
with Embedded
Audio In/Out
External Reference
Audio Monitor
AES/EBU Audio In/Out
to Monitor System
Reference Monitors
Analog Audio
Inputs/Outputs
(Balanced)
Audio
Monitor
AES
/
EBU Au
d
io In
/
Out
tM it St
s
POWER
CMPTR
RAID storage
Computer Monitor
R
AID storag
e
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
Optional
Genlock
Reference
Video Monitor
Component
Video
Workstation
AJA KONA LHe Plus Card
Connect to
KL-Box Using
Cables and Instructions
supplied with it
Installed
inside the
computer
HBA for connection
of external storage
Page view 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 73 74

Comments to this Manuals

No comments