AJA FS2 Instruction Manual download pdf (Page 175)

177

FS2 Installation and Operation Manual — Audio 1 and 2 Screens

Audio 1 and 2 Screens

The Audio 1 and Audio 2 browser screens display the audio control selections for the

audio inputs and outputs.

Audio Input Audio Input performs input audio source selection for the Audio Processor 1. Multiple

input sources may be present at all the connectors on the FS2 rear panel, but the

active input source routed through the FS2 will be the one selected here.

(1) Audio Input Selections Selection Descriptions

AES/EBU (default)

Analog

Embed SDI1

Embed SDI2

Embed Fiber1

Embed Fiber2

HDMI

Dolby Decode

Mute

Channel Map

Stereo Map

Selects the AES/EBU digital audio input (16-ch) as the input source.

Selects the Analog audio connector (DB25, 8-ch) as the input source.

Input channels 9-16 are set to Mute.

Uses the embedded audio from the SDI 1 video input as the input

source.

Uses the embedded audio from the SDI 2 video input as the input

source.

Uses the embedded audio from the optional Fiber 1 video input as

the input source.

Uses the embedded audio from the optional Fiber 2 video input as

the input source.

Uses the embedded audio from the HDMI video input (8-ch) as the

input source. Input channels 9-16 are set to Mute.

Selects the Dolby Decoder output as the audio processor input.

Sets all input channels to Mute.

For the 16 channels of audio input, selects inputs according to Audio

Map settings. Any of the 16 embedded channels can be mapped

to one of the 96 sources.

For the 16 channels of audio input, selects stereo inputs according to

Audio Map settings. Any channel pair (8 pair total) can be mapped

to 48 different choices.

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 229 230

No comments

AJA FS2 Instruction Manual Page 175