AJA FS2 Instruction Manual download pdf (Page 153)

155

FS2 Installation and Operation Manual — Video 1 & 2 Screens

3. Dual Link—Dual Link referred to here is 1080p50/59.94 on two 1.5 Gb HD-SDI

connections. Selecting Dual Link as the Video Input for Video Processor 1 or 2 will

allocate both SDI Inputs for Dual Link use. Both Processors can use the Dual Link

Input, or if only one Processor is using it, the other Processor is free to select another

input. The Fiber inputs operate the same way.

4. I/O Limitations—Some frame rates are not available at the inputs or outputs with

the current software release. Additional frame rates will be supported in a future

release. Please see the Appendix A Specifications for affected frame rates.

Output Format The Output Format setting defines the output format of the Video Processor (1 or 2). The

scan format (progressive or interlaced) is set by the Video Input Scan Format setting. The

frame rate is set by the Frame Rates setting.

Notes:

1. Output Format Selection Constraint—Available frame rates depend on System 9

Frame Rates parameter setting.

2. Output Follow Ref Exception—If the Output Format is set to Follow Ref, and the

Genlock Source is set to Input, and the Video Input is set to select one of the analog

inputs, the output format will follow the input format rather than the format of the

signal on the Ref BNC as might be expected. (This combination of settings effectively

disconnects the Ref BNC.)

3. Output Timing Memory—Changing the Output Format selection automatically

selects new values for H & V timing parameters (Output Timing H, Output Timing V and

Analog Output Fine). Each Output Format mode remembers its own H and V timing

settings.

4. Output Format Mapping—The Output Format selection is remembered for each of

the frame rates. If you change the frame rate selection, the Output Format associated

with the newly selected frame rate is recalled.

5. I/O Limitations—Some frame rates are not available at the inputs or outputs with

the current software release. Additional frame rates will be supported in a future

release. Please see the Appendix A Specifications for affected frame rates.

(2) Output Format Selections Selection Descriptions

Follow INPUT (default)

Follow REF

525/625<frame rate>

720p<frame rate>

1080i<frame rate>

1080PsF<frame rate>

1080p<frame rate>

2K1080p<frame rate>

Follow the format of the selected input.

Follow the format of the reference input (Ref).

Select 525/625 SD as the Video Processor output.

Select 720p HD as the Video Processor output.

Select 1080i HD as the Video Processor output.

Select 1080PsF HD as the Video Processor output.

Select 1080p HD as the Video Processor output.

Select 2K1080p HD as the Video Processor output.

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 229 230

Comments to this Manuals

No comments

AJA FS2 Instruction Manual Page 153

Comments to this Manuals

Related products and manuals for Car media receivers AJA FS2