AJA FS2 Instruction Manual download pdf (Page 118)

118

8.0 Audio

Output Phase

This parameter enables or disables individual audio phase adjustment of the 16

audio output channels. When Adjust is selected, parameters 8.1 through 8.16 are

then used to adjust phase for the 16 channels.

Note: If parameter 3 Audio Follow Video is set to On, the Audio Output Phase

selection is independently kept for each video input. If Audio Follow Video is set to

Off, a single Audio Delay value applies, regardless of the video input. (This value is

independent of any of the values used in Audio-Follow-Video mode.)

8.1–8.16 Audio

Phase Ch1–16

These parameters select whether audio phase is normal (same as passed from the

input) or inverted on Channels 1–16.

If parameter 3 Audio Follow Video is set to On, then Audio Output Phase selection is

independently kept for each video input. If Audio Follow Video is set to Off, then the

last setting you made for Audio Output Phase is used.

8.0 Audio Output Phase Selections Selection Descriptions

Unity (default)

Adjust

Disable audio phase adjustments and set phase to unity.

Enable audio phase adjustments for the 16 audio channels.

8.1-16 Audio Phase Ch1–

Ch16

Selections Selection Descriptions

Normal (default)

Invert

Phase is unaltered as it passes from the input to the output.

Phase is inverted as it passes from the input to output. (This may be useful

to correct analog audio signals that are incorrectly wired, placing audio

out of phase at input.)

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 229 230

No comments

AJA FS2 Instruction Manual Page 118