AJA KONA 3G Instruction Manual download pdf (Page 72)

Input Select Tab

Screen

On the Inputs screen you can view the currently selected video and audio input sources and

map audio sources to the channels supported by Final Cut Pro (more on this later). Two

information panes in the screen are provided: Video Input and Audio Input.

AJA Control Panel, Inputs Tab

Input Select Tab Settings

Video Input—the pulldown menu allows you to see and change what's currently selected

and the video format that KONA 3G has detected (if any). In the example shown

previously, it shows that video is selected at the SDI 1 input and the format is 1080i with a

frame rate of 29.97. Since this text is shown in blue, you can tell that it matches the

framebuffer's primary format selected in the “Formats” screen. By looking at the input

source, you can determine how the primary format should likely be set (unless you want

to perform a conversion on input.) If you wish to select a different input use the pulldown

to select either SDI 2 or Dual Link if your source is 4:4:4 RGB or Stereo 3D.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 143 144

No comments

AJA KONA 3G Instruction Manual Page 72