AJA KONA 3G Instruction Manual download pdf (Page 117)

109

KONA 3G Installation and Operation Manual — Checking the System with a

Video.” This allows you to select via a pull-down menu any KONA 3G video output and audio

output.

The window also allows you to turn on and off device and audio output warnings.

Checking the System with a Simple Test Project of Bars and Tone

To test that you’ve installed the KONA 3G drivers and have audio and video monitoring correctly

configured, try creating a simple Final Cut Pro project with bars and tone.

1. Select an Easy Setup as previously discussed (go to the Final Cut Pro menu and select

Easy Setup; then select a desired preset).

2. Select New Project from the File menu.

Create a New Project

3. The Sequence window will be at the bottom of the screen and a Browser window will be

at the top left. Look at the Browser window and locate the “Effects” tab at the top right.

Click on it.

4. Locate the Viewer window in Final Cut and click on the Filmstrip pulldown menu button

(it’s a “filmstrip” icon with an “A” on it). Select “Bars and Tone NTSC” or “Bars and Tone

PAL”. The viewer window will display bars after you do this.

5. Click the mouse cursor on the Bars and Tone in the Viewer window and drag it to the

beginning of the sequence window. You’ll see the bars and tone show up on the

sequence where it can then be played.

6. Go to the beginning of the sequence by clicking on the left-most icon and then click the

“Play” icon. You should see and hear the bars and tone on your video monitor and audio

monitoring system.

If you don’t see bars on the external video monitor and hear tone, check your connections and

ensure KONA 3G is selected in the Easy Setups and Audio/Video Settings as necessary.

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 143 144

No comments

AJA KONA 3G Instruction Manual Page 117