Aja KONA LHi User Manual download pdf (Page 15)

KONA v10.5 www.aja.com

supported. The HDMI input is designed to support long cable runs—up to 100 ft. when

using 22 or 24AWG HDMI cable, or up to 50 ft. using 28 or 30AWG HDMI cable. The HDMI

output supports standard HDMI cables only.

2-Channel Digital AES/EBU

Audio Inputs And Outputs:

One female XLR connector is provided for the channel 1 and 2 inputs, while a male XLR

connector carries channel 1 and 2 outputs. AES/EBU signals are handled internally as 24-

bit digital.The optional KL-Box also provides XLR audio connections on the front panel.

NOTE: AES XLR connections are digital and cannot be used with analog equipment having XLR

connectors.

Analog 2-Channel Balanced

Audio:

Two sets of analog XLR connectors, one for each channel, support balanced audio

connections. Male XLRs are provided for outputs and female XLRs are provided for

inputs. Balanced audio (differential) connections provide better analog audio quality

over longer cable runs. Most professional quality VTRs and audio equipment have XLR

style connectors for analog audio. Analog audio signals are converted internally to 24-bit

digital.

Unbalanced Audio on KL-Box: On the KL-Box are two analog output connectors, one for each channel. These

connectors are RCA-style phono jacks.

RS-422 Machine Control : A female DE-9 connector on the LHi/LHe Plus breakout cable provides connection for

VTRs, camcorders, disk media servers, and other devices using RS-422 SMPTE (Sony)

protocol. This RS-422 connector is also present on the optional KL-Box (connector pinout

Sony 9-pin protocol).

KONA 4/3G to K3G-

Box Connectors

Connectors on the standard cable set are labelled for their function for easy installation

and maintenance. Connectors on the optional K3G-Box (breakout box) are similarly

labelled.

8-Channel Digital AES/EBU

Audio I/O:

When using the standard cables, BNC connections are provided for AES/EBU audio input/

output. Four BNC connectors are provided for audio input and four for audio output.

Each BNC carries two channels. The connectors are labeled for input/output and

channels.

The optional K3G-Box provides BNC audio connections on the front panel for 16-

channels of audio input and output.

Unbalanced Audio on K3G-

Box:

On the K3G breakout box are two analog output connectors, one for each channel. These

connectors are RCA-style phono jacks.

RS-422 Machine Control: A female DE-9 connector provides connection for VTRs, camcorders, disk media servers,

and other devices using RS-422 SMPTE (Sony) protocol. This connector is present on both

the general I/O cables and the optional K3G-Box (connector pinout is

Sony 9-pin protocol.)

SDI Inputs & Outputs: On the KONA 4/3G card, mini-connectors are provided for bi-directional SDI inputs and

outputs for Single Link, Dual Link or 4K/UHD I/O. A cable with four Mini-connectors on

one end and four BNCs on the other end is provided for connecting equipment to the SDI

inputs and outputs.

In Standard mode, KONA 4/3G offers four video outputs altogether:

• two SDI outputs that are used for both High- and Standard-definition (SD/HD-SDI)

• two monitor outputs (discussed later), one component analog and one HDMI 1.4a.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 96 97

Comments to this Manuals

No comments

Aja KONA LHi User Manual Page 15

Comments to this Manuals

Related products and manuals for Hardware Aja KONA LHi