Aja D5CE User Manual download pdf (Page 7)

AJA D5CE Serial Digital Encoder User Manual — Installation

Installation

Typically, D5CE installation consists of the following:

disconnect +5VDC from the convertor

conﬁgure the DIP switch for the desired equipment conﬁguration and video formats

connect video equipment to the convertor BNCs

apply +5VDC power to the converter (AJA power supply model DWP)

Specifications

Item Speciﬁcation

Serial Input SMPTE 259M 270MB, (SDI)

SDI Cable Equalization 300 meter 8281 typical

Serial Output (looping) Equalized, Re-clocked

Outputs 1. YPbPr - SMPTE, EBU-N10, Betacam, RGB (3 BNCs)

2. NTSC, PAL (3 BNCs)

3. NTSC/PAL and Y/C (3 BNCs)

Frequency Response +/-.25dbto 5.5Mhz (Y)

+/-.25dbto2.0Mhz (Chroma-Component, RGB)

+/-.25dbto 1.3Mhz (Chroma - Composite)

2T K factor < 1% (Y)

Differential Gain < 1 .5%

Differential Phase < 1 .5 degree

Y/C delay 10ns maximum

D/A Converters 10 bits

Signal Path 8 bits

Delay (input to output) 1.5us

Output level adjustment +/- 20% (internal)

Output level matching 1 .5% or 10mv (All outputs are separately buffered)

Power

(AJA power supply model DWP)

5v DC regulated, 2.5 watt

Size 5.1" x 2.4" x 1" (131 x 61 x 25 MM.)

1 2 3 4 5 6 7 8

No comments

Aja D5CE User Manual Page 7