Aja KUMO CP User Manual download pdf (Page 22)

KUMO v3.1 www.aja.com

Figure 13. Mac Network Setup Screen (System Preferences -> Network)

B. Input the address information shown below:

• IP Address: 192.168.101.X (do not use .1 in the last octet).

• Subnet Mask: 255.255.255.0

C. Click Apply.

3. Ensure the KUMO device to be controlled is connected to the Mac via Ethernet

(directly or via LAN).

4. Start Safari and enter 192.168.101.1 as the web address. This is the KUMO temporary

static IP address.

5. Once you’ve connected using the static IP, you can then enter a desired network

configuration using the KUMO device's Network tab.

6. Restore your computer to its normal network settings using this procedure and the IP

addresses you recorded earlier.

Setup and Control from a Browser on Windows 7

The easiest methods of setting up a controlling a KUMO device from a PC running

Windows 7 are:

• Setup and Control from a Browser on Windows 7 using UPnP

• Setup and Control from a Firefox Browser on Windows 7 using Bonjour

• Setup and Control from a Browser on Windows 7 using a Static IP Address

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 65 66

No comments

Aja KUMO CP User Manual Page 22