AJA KONA 3G Instruction Manual download pdf (Page 28)

Installing the KONA Card in a Windows PC

1. Place the PC in a well-lit convenient area, where you will have easy access to the chassis

access door.

2. Touch the outside of the PC to discharge any static electricity in your body. Remove the

power cable from the back of the PC.

3. Open the PC to gain access to the card slots as described in your Workstation User

Manual.

4. Remove the KONA card from its protective anti-static bag; place the card on top of the

bag.

5. To install the KONA card and RAID controller card (SCSI or Fibre Channel), refer to the

AJA website for the latest installation updates at the URL provided.

Because of hardware and software changes, AJA engineers are constantly testing and grading

workstation performance. The AJA website is your best source of up-to-date approved

workstation configurations.

Note: Always put the RAID controller and KONA on separate PCI busses. This improves

performance by reducing bus contention.

KONA Card placement in HP Z800 Motherboard

KONA 3G

HP Z800 Workstation

DIMM 6

DIMM 5

DIMM 4

DIMM 3

DIMM 2

DIMM 1

DIMM 6

DIMM 5

DIMM 4

DIMM 3

DIMM 2

DIMM 1

CPU 1 CPU 2

PCI-e 8x (4x)

SATA 0 SATA 1 SATA 2 SATA 3

SATA 1 SATA 1

SATA 4 SATA 5

SATA 1 SATA 1 SATA 1 SATA 1 SATA 1 SATA 1

PCI-e 8x (4x)

PCI-e 16x

PCI 33MHz

PCI-e 16x (8x)

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 91 92

No comments

AJA KONA 3G Instruction Manual Page 28