Aja D10C2 User Manual download pdf (Page 5)

AJA D10C2 10-bit Serial Digital to Composite/Component Converter User Manual — User Controls

User Controls

The user interface for the D10C2 is a 4-switch DIP

accessible through a cut-out in the bottom of the

unit. Use the DIP switches to conﬁgure outputs,

pedestal, and blanking.

Switch 1 selects the type of output. Switches 2

through 4 select the output video format, pedestal

and blanking. The exact function of each DIP switch

and what it controls is described on the following

pages.

Switch 1 Selects Composite or Component Video Output

Switch 2 Select RGB Or YPbPr Output (3 BNCs)

Switch 3 Set Pedestal and Levels for YPbPr

Note:

This switch has no effect on 625 input

ON OFF

Selects component video

output

Selects composite video out

ON OFF

Selects YPbPr output on the 3

BNCs when SW1 is set to

COMPNT (ON)

Selects RGB output on the 3 BNCs

when SW1 is set to COMPNT (ON)

ON OFF

7.5 IRE pedestal for NTSC (also

selects BETA 525 levels for

YPbPr)

No pedestal (also selects SMPTE

levels for YPbPr)

DIP Switches

OFF ON

1 2 3 4 5 6 7

No comments

Aja D10C2 User Manual Page 5